Fujitsu fi-8190 Operator's Manual page 312

An Error (Error Code "U0:10", "U4:40" or "U5:4A") is Already Displayed in the LCD
After Power-on [fi-8190/fi-8290/fi-8170/fi-8270]
Check the following points
Did you unlock the transport lock switch? [fi-8290/fi-8270] (page 312)
●
Is the ADF closed firmly? (page 312)
●
Is the print section (imprinter cover) closed firmly? (when the imprinter is installed) [fi-8190/fi-8170]
●
(page 312)
If the problem still persists, check each item in
330) first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
●
Did you unlock the transport lock switch? [fi-8290/fi-8270]
Solution
Turn off the scanner, and unlock the transport lock switch.
For details about how to turn off the scanner, refer to
For details about unlocking the transport lock switch, refer to
fi-8250U] (page
●
Is the ADF closed firmly?
Solution
Close the ADF firmly.
For details, refer to
●
Is the print section (imprinter cover) closed firmly? (when the imprinter is installed) [fi-8190/fi-8170]
Solution
Close the print section (imprinter cover) firmly.
For details, refer to the fi-819PRB Imprinter Operator's Guide.
274).
How to Close the ADF (page
Before You Contact the Scanner Service Provider (page
Turning the Power ON/OFF (page
Transport Lock Error [fi-8290/fi-8270/fi-8250/
78).
312
Troubleshooting
72).