Pause; Outside Designated Scan Area Error (When Operating With A Computer) - Fujitsu fi-8190 Operator's Manual

Pause

Scanning has been paused by the user.
When you press the following button on the following scanner in the middle of a scan, scanning stops
temporarily.
● For fi-8190/fi-8290/fi-8170/fi-8270
[Scan/Enter] button
To resume scanning, press the [Scan/Enter] button.
● For fi-8150/fi-8250/fi-8150U/fi-8250U
[Send to] button
To resume scanning, press the [Scan/Stop] button.

Outside Designated Scan Area Error (When Operating with a Computer)

A paper jam occurs when the bottom edge of the document is detected before the specified area is scanned
with the ADF.
Example:
Outside of the document may have been scanned because the scanned document is shorter than the specified
paper size.
In this case, take one of the following measures, and then scan again.
● Load a document of the specified paper size in the ADF paper chute (feeder).
280
Troubleshooting