Fujitsu fi-8190 Operator's Manual page 109

For details, refer to How to Load a Document in the ADF Paper Chute (Feeder) (page
4
Select a job in the [Job list] screen on the LCD, and start a scan.
a
Press the [ ] button/[ ] button to select a job, and then press the [Scan/Enter] button.
Scanning starts.
HINT
A message may appear on the screen.
Check the message and press the [Scan/Enter] button to start a scan.
Press the [Stop/Clear] button to return to the [Job list] screen.
b
When a notice saying that the saving process has ended is displayed on the screen, press the
[Scan/Enter] button.
Return to the [Job list] screen.
Images are sent to PaperStream NX Manager.
For details, refer to the PaperStream NX Manager User's Guide.
109
How to Perform a Basic Scan
113).