Related Manuals for Fujitsu fi-4110CU Series
Summary of Contents for Fujitsu fi-4110CU Series
- Page 1 fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT LEANING NSTRUCTIONS CG00002-003401 Revision A...
-
Page 2: Kit Contents
fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS ONTENTS Guide Assembly Pad Assembly Qty 1 Qty 3 Cotton F1 Cleaner Swabs Isopropyl Alcohol Qty 1 100/pack Qty 1 Lint Free Cleaning Paper Cleaning Cloths Qty 1 10/pack Qty 2 20/pack... -
Page 3: Page Count
S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS ONSUMABLES Description Life Fujitsu P/N Guide Assembly 50,000 PA03209-F014 Pad Assembly 12,000 PA03209-F010 Guide Assy Pad Assembly Note: Replacement Cycles are estimated guidelines established by testing with A4/Letter sized woodfree and wood based 17 lb paper. NCR or Carbonless paper has chemical composition which damages the Pad, and the Pick Roller. - Page 4 fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS ONSUMABLES OUNT CONTINUED • Your computer will display the Properties for the scanner you have. This will show the Pad and Pick Roller page counts on the Device Set tab. • The Target Value to Change Supplies is a rough estimate of when supplies should be changed with new ones.
-
Page 5: Replacing The Pad Assembly
fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE SSEMBLY A defective or improperly installed Pad Assembly can cause misspicks, skew, or double fed documents. To replace the Pad Assembly perform the following steps. • Remove all documents from the ADF Paper Open ADF to Front Chute. - Page 6 fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE UIDE SSEMBLY ADF Paper Chute • Remove all documents from the ADF Paper Chute and remove the ADF paper chute from the scanner. Open the ADF towards the front of the scanner while holding up the Cover Open cover open lever.
- Page 7 fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS EPLACING THE UIDE SSEMBLY CONT • Attach the ADF paper chute. ADF Paper Push in the center of the ADF Chute to close, press until you hear a click which indicates the ADF is fully closed.
-
Page 8: Cleaning Materials
fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING OCATIONS AND REQUENCIES Location Tools Frequency Cleaning Sheets Every 1,000 Sheets Pick Roller and Pad Cloth & Isopropyl Alcohol Every 5,000 Sheets Plastic Feed Rollers Cloth & Isopropyl Alcohol Every 5,000 Sheets Sheet Guides Cloth &... - Page 9 fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE OLLERS WITH THE LEANING APER The cleaning papers are designed to remove only loose paper dust and ink from the rollers. Use the cleaning paper approximately every 1,000 sheets scanned. They are to be used in between the thorough cleanings of the scanner.
- Page 10 fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE WITH LOTHS Note: The glass surface inside the fi-4110EOX2 ADF becomes hot during scanner operation. Before performing this cleaning turn off the scanner and disconnect the AC adapter from the power outlet, wait at least 15 minutes for the scanner to cool.
- Page 11 fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE WITH LOTHS CONT LEANING THE OLLER • You may want to remove the Claw pick roller to clean it. Do so by pushing the claw while lifting on the handle to remove the Pick Roller and guide Pick Roller together.
- Page 12 fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS LEANING THE WITH LOTHS CONT & F LEANING THE OLLERS LASS OLLERS Sheet Guides Pick Roller Feed Rollers Pad Assembly Plastic Rollers Glass Eject Rollers • Clean the Plastic Rollers lightly with a lint-free cloth moistened with F1 Cleaner (90 % or higher Isopropyl Alcohol).
- Page 13 fi-4110CU/M3091/M3092 S ERIES ONSUMABLE EPLACEMENT AND LEANING NSTRUCTIONS...