Emotiva BasX PT1 User Manual page 34

Line Level Analog Performance (both)
Maximum output level: 4 VRMS.
Frequency response: 5 Hz to 50 kHz +/- 0.04 dB.
THD+noise: < 0.001% (A-weighted).
IMD: < 0.004% (SMPTE).
S/N ratio: > 120 dB.
Crosstalk: < 90 dB.
Phono Input Analog Performance (both)
Frequency response (moving magnet and moving coil): 20 Hz to 20 kHz; ref standard RIAA curve.
THD+noise: < 0.015% (moving magnet; A-weighted); < 0.06% (moving coil; A-weighted).
Gain (ref unity gain on main inputs; at 1 kHz): 44 dB (moving magnet); 55 dB (moving coil)
S/N ratio: > 78 dB (ref 5 mV; moving magnet); > 58 dB (ref 0.5 mV; moving coil).
Digital Performance (both)
Frequency response: 5 Hz to 20 kHz +/- 0.15 dB (44k sample rate).
Frequency response: 5 Hz to 80 kHz +/- 0.25 dB (192k sample rate).
THD+noise: < 0.003% (A-weighted; all sample rates).
IMD: < 0.007% (SMPTE).
S/N ratio: > 110 dB.
Amplifier Performance (TA1 only)
60 watts RMS / channel; into 8 Ohms, both channels driven, 20 Hz - 20 kHz, THD < 0.02%.
100 watts RMS / channel; into 4 Ohms, both channels driven, at 1 kHz, THD < 1%.
Minimum load impedance: 4 Ohms; Rated impedance: 8 Ohms.
Frequency response: 20 Hz to 20 kHz +/- 0.15 dB; 5 Hz to 80 kHz +0 / -1.8 dB.
S/N ratio: 116 dB.
Power Requirements
115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).
The BasX PT1 has a universal SMPS power supply which accepts from 100 VAC to 240 VAC.
The BasX TA1 has a linear main power supply that accepts either 115 VAC or 230 VAC.
Dimensions (both)
17" wide x 2 5/8" high x 12.5" deep (without connectors).
21" long x 7" high x 17-1/2" deep (boxed).
Weight
PT1: 9 lbs. (unit only); 14 lbs. (boxed).
TA1: 15 lbs. (unit only); 20 lbs. (boxed).
BasX PT1 and BasX TA1
Page 30