Emotiva BasX PT1 User Manual page 16

9. Bluetooth Antenna Connector
Connect the included Bluetooth antenna to this connector.
10. Trigger Output
A 12 VDC signal is sent from the Trigger Output of the PT1 to turn on other devices when the PT1
is turned on. This signal can be used to turn on other trigger-enabled audio equipment - such as a
power amplifier.
11. Power Cord Receptacle
Use this receptacle to attach the included power cable for the PT1.
12. AC Power Switch
Switches the main AC power to the PT1 On and Off. When this switch is Off, no controls operate,
and the PT1 cannot be turned On by the front panel Standby Button or remote control.
BasX PT1 and BasX TA1
Page 12