Table of Contents
Advertisement
Frequency - Allows you to manually tune your favorite FM station.
Press the Right button to select Frquency; the current Frequency and Preset will be shown.
Use the Volume knob or Up / Down buttons to select the Frequency; the currently selected
combination of Frequency and Preset will be continuously displayed.
Seek - Instructs the FM Tuner to scan the FM band looking for the next strong station.
Press the Right button to select the Seek function; then use the Up / Down buttons, or rotate
the Volume knob to the left or right, to command the FM Tuner to seek up or down to the next
strong station. The Tuner will stop at the next strong station it detects.
Using The FM AutoTune Feature
When you select this option the FM Tuner in your unit will scan through the FM frequency band
and preload as many strong stations as it can detect into the FM tuner's 15 station presets.
After pressing the Right button to start the Autotune process, it will proceed and complete
automatically.
Note: Using Autotune will ERASE your current FM Station Presets and replace them with the
stations found by the signal scan.
Configuring FM Station Presets
SETUP MENU
SETUP MENU
BasX PT1 and BasX TA1
TUNER MENU
TUNER MENU
TUNER MENU
SEEK or FREQ
Choose Station
MENU
Choose Preset
SAVE MENU
and Save
Page 23
Hide quick links:
Advertisement
Table of Contents
