Table of Contents
Advertisement
Release the right- and left-hand screw from the
3.
cover in the upper area of the oven door. Pull out
and remove the cover.
2
Remove the two small seals. Lift the top pane up
4.
and out.
1
2
Unscrew the retaining clips on the right and left. Lift
5.
the pane and remove the claws from the pane.
Remove the seal from below the pane. To do this,
6.
pull the seal and remove it upwards. Remove the
pane.
Pull the lower pane diagonally upwards and out.
7.
1
1
Never remove the screws that are located on the
8.
right and left of the sheet metal part.
20.4 Fitting the door panes
When fitting the panes, ensure that, on both panes, the
lettering "top right" is not upside down at the bottom
left.
Insert the lower pane with the no. 1 downwards at
1.
an angle.
Insert the middle pane with no. 2 inwards.
2.
Appliance door en
27
Advertisement
Table of Contents
