Table of Contents
Advertisement
9.3 Types of heating and temperature
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature
2.
or grill setting.
a The appliance starts heating after a few seconds.
a Depending on the appliance type, rapid heating
automatically switches off at set temperatures of
200 °C and above and with certain types of heat-
ing.
→ "Rapid heating", Page 15
When the dish is ready, switch off the appliance.
3.
Tips
¡ The most suitable type of heating for your food can
be found in the description of the types of heating.
10 Rapid heating
To save time, rapid heating can shorten the preheating
time for set temperatures over 100 °C.
You can use rapid heating for the following types of
heating:
¡ 3D hot air
¡ Top/bottom heating
10.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
11 Time-setting options
Your appliance has different time-setting options which
ensure that operation can be controlled.
11.1 Overview of the time-setting options
You can use the
button to select the different time-
setting options.
Time-setting
Use
option
Timer
The timer can be set independently
of the operation. It does not affect
the appliance.
Cooking time
If a cooking time has been set for
the operation, the appliance stops
heating automatically once this time
has elapsed.
End
A time at which the operation ends
can be set for the cooking time. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time
Set the time.
¡ You can also set a cooking time and an end time
on the appliance.
→ "Time-setting options", Page 15
Changing the type of heating
You can change the type of heating at any time.
Use the function selector to set the required type of
▶
heating.
Changing the temperature
You can change the temperature at any time.
Turn the temperature selector to set the desired
▶
temperature.
1.
Set a suitable type of heating and a temperature of
at least 100 °C.
Rapid heating automatically switches off at temper-
atures of 200 °C and above.
If rapid heating does not switch off automatically,
2.
press the button.
appears in the display.
a
a Rapid heating starts after a few seconds.
a Once rapid heating has ended, a signal tone
sounds and the symbol goes out on the display.
Place the food in the cooking compartment.
3.
Cancelling rapid heating
Press the button.
▶
a The symbol disappears from the display.
11.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set up to 23 hours
and 59 minutes regardless of whether the appliance is
on or off. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
Press
repeatedly until is selected in the display.
1.
Use the
or
button to set the timer duration.
2.
Button
Recommended value
5 minutes
10 minutes
Up to 10 minutes, the timer duration can be set in
30-second increments. The time increments be-
come bigger as the value increases.
a The timer starts and the timer duration begins to
count down after a few seconds.
a An audible signal sounds and the timer duration is
zero in the display when the timer duration has
elapsed.
Once the timer duration has elapsed
3.
Press any button to switch off the timer.
‒
Rapid heating en
15
Advertisement
Table of Contents
