Bobbin Winder Stopper - Janome 1600P-QC Service Manual

A
16.5 –19.5mm
w
B
q

10. Bobbin Winder Stopper

The amount of thread wound on the bobbin should be
16.5–19.5 mm in diameter.
z Loosen the setscrew
w
stopper to adjust the thread amount.
• If the amount is too mauch, turn the stopper in the
direction A.
• If the amount is not enough, turn the stopper in the
direction B.
x Tighten the setscrew
9
q . Turn the bobbin winder
q
firmly.