Static Cutter Blade - Janome 1600P-QC Service Manual

q
e
4 mm
t
w
4 mm
Align the left edges of the thread
cutter blade and the static cutter
blade.

3. Static Cutter Blade

z
Remove the needle plate and base.
x
Lower the needle bar to the lowest position. Turn the
handwheel toward you while pushing up the link body
q
under the static blade
c
Loosen the setscrews
static cutter blade
center of the needle drop position
cutter blade
static blade and thread cutter blade are aligned.
v Tighten the setscrews
base.
r
e
25
to engage the thread cutter blade
e
.
r
and adjust the position of the
e so that the distance between the
e
is 4 mm and the left edges of the
r
. Attach the needle plate and
w
and bring it
t
and the static