Map Settings - Clarion NX501 Owner's Manual & Installation Manual

Button

4.3.5 Map settings

You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable
color themes from the list for both daytime and night use, change the red arrow to a 3D car model, show
or hide 3D buildings, turn track logging on or off, and manage you Place visibility sets (which Places to
show on the map).
The map is always shown on the screen so that you can see the effect when you change a setting.
Button
Enter the average consumption of your vehicle when used in built-up areas. If
necessary, tap
the measurement unit.
Enter the average consumption of your vehicle when used on highways. If
necessary, tap
the measurement unit.
Select the engine and fuel type of your vehicle. This helps in estimating the CO
emission.
Enter the average fuel price for travel cost calculation. If necessary, tap
and select
If the selected routing method is not Green, you can have your route compared to
the best green alternative on the screen when confirming the route. If this
alternative is much better than the selected method, you can quickly switch to
Green mode.
Switch the map view between a 3D perspective view and a 2D top-down view.
Adjust the basic zoom and tilt levels to your needs. Three levels are available.
Description
and select
and select
to change the currency.
Description
to change
to change
NX501/NZ501 English 80
2