Remote Control - Clarion NX501 Owner's Manual & Installation Manual

5. REMOTE CONTROL

[MUTE]
[ /
[ 0-9 ]
[SRCH]
[BACK]
[ , , ,
[TITLE]
[ ], [
[ZOOM]
[AUDIO]
Replacing the batteries
1.Press the retention tab and pull out the
battery tray and remove the old battery.
2. Insert the new CR2025 battery and slide
the battery tray back in the remote control
the same direction that you removed it.
Please ensure the tray is inserted in the
correct direction.
]
]
]
Signal transmitter
Operating range : 30°in all directions
[OPEN]
[POWER / SRC]
[VOLUME]
[NAV/ AV]
[BAND]
[SEL]
[MENU]
[PIC]
[ENT]
[TAG]
[RPT]
[ROOT]
[
[SUB.T]
[ANGLE]
Note:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
WARNING
Lithium batteries contain
Perchlorate
Dispose of discharged batteries properly.
], [ ]
NX501/NZ501
13