Lincoln Electric VRTEX ENGAGE Operator's Manual page 46

VRTEX ® ENGAGE™
Figure B.105 – Incorrect settings
39. After the correct settings have been entered the user will be taken
to the weld environment of choice. See Figure B.106. Tap the
screen to continue.
Figure B.106 – Weld environment
40. Using the GMAW gun and the weld area, perform the weld
procedure. See Figure F.107. Select the End Pass icon when the
weld is complete. Select the Next (white arrow) icon to view the
LASER screen. See Figure B.108.
Figure B.107 – Weld screen
41. Once a passing score has been achieved, select the Go To Lesson
View icon to continue. See Figure B.108.
Figure B.108 – LASER screen
42. The lesson overview screen will now be displayed and the
progress will be updated to reflect the user progress. See Figure
B.109. Select the Retry Lesson icon to retry the lesson. Select
the Go To Next Lesson icon to begin the next lesson.
Figure B.109 – Lesson overview
43. The lesson overview screen will provide a brief description of the
next lesson (Tape Reading). Select the Start Lesson icon to begin
the lesson. See Figure B.110.
Figure B.110 – Lesson overview
B-30
OPERATION (USER MODE)