Lincoln Electric VRTEX ENGAGE Operator's Manual page 41

VRTEX ® ENGAGE™
12. Using the touch screen monitor, select the appropriate lesson
(First Person Safety) by tapping either the red arrow(s) or the
small box (with the lesson name in it) above or below the center
box. See Figure B.78. The lesson will be displayed in the center
box. Select continue when the desired lesson is shown in the
center box.
Figure B.78 – Select lesson
13. The lesson overview screen will provide a brief description of the
chosen lesson (First Person Safety). Select the Start Lesson icon
to begin the lesson. See Figure B.79.
Figure B.79 – Lesson overview screen
14. The lesson instruction screen will provide instructions on how
to complete the lesson. See Figure B.80. Read the on-screen
instructions and tap the screen to begin the lesson. The
instructions for this lesson (Fist Person Safety) are as follows:
1. Tap to equip PPE.
2. Tap Weld when ready to weld.
3. Review the notes to determine how to protect yourself.
Figure B.80 – Lesson instruction screen
15. Complete this lesson by selecting the PPE. The PPE items will
have a white outline. Each item will need to be selected and the
user will select the Weld icon to complete the lesson. See Figure
B.81.
Figure B.81 – First person safety
16. After completing the lesson, notes will be displayed pertaining
to the lesson. See Figure B.82. Select the End icon to exit the
lesson. If the user misses a hazard, the hazard will be displayed
on the screen.
Figure B.82 – Lesson notes
B-25
OPERATION (USER MODE)