Table of Contents
Advertisement
Installation
Technical Information for the Installer
In order to install the hob into the kitchen fixture, a hole with the dimensions shown in fig. 12 has to be
made, bearing in mind the following:
– Within the unit, between the bottom of the hob and the upper surface of a shelf there must be a
clearance of at least 30mm.
– It is absolutely essential that you place a separator between the base of the hob and the built-in unit or
the oven.
– The hob must be kept no less than 200mm away from any side wall (fig. 12).
– The hob must be installed at least 60mm from the wall.
– There must be a distance of at least
650mm between the hob and any
wall cupboard or extractor hood
positioned immediately above (see
fig. 14).
– If the hob is installed over a built-
in oven, there must be a distance
of at least 30mm between the two
appliances. The two appliances should
be connected to the gas supply with
independent connections
Installation in Kitchen Cabinet with Door
It is recommended that a 30mm clearance be left
between the cooktop and the fixture surface (fig. 13).
Clearance
Space for
connections
Fig. 12
Door
Fig. 13
Fig. 14
13
Advertisement
Table of Contents
