Casio WK-1600 User Manual page 56

Octave Shift
When using the piccolo tone, there may be cases when very high notes
you want to play are not included within the range of the keyboard.
When this happens, you can use octave shift to shift the keyboard
range one octave up. In this case you can use octave shift to shift the
range of the tone up or down.
Note that octave shift is available with the Pattern Sequencer only.
O c t =
Use [+] and [–] to select the octave shift setting you want.
-1: Range shifted one octave down.
0: No shift
1: Range shifted one octave up.
Work Area Clear
Use this operation to clear Pattern Sequencer work area contents. You
must clear the work area when you plan to create an original accom-
paniment pattern from scratch.
Wo r k D e l
1.
In the Global menu, use [ ] and [ ] to display the
"Work Del" screen, and then press the [+] and [–]
buttons at the same time.
S u r e ?
• This message confirms whether or not you really what to
clear work area contents.
2.
Press YES to clear work area contents or NO to abort
the clear operation without clearing anything.
• The message shown below appears for about one second and
then the display returns to the Global menu.
C om
E-54
WK-1800/1600(E)-48~57
MODE
FULL RANGE
CHORD MAX
FINGERED
CASIO CHORD
MIN
EXTERNAL CH 1 CH 2 CH 3 CH 4 CH 5
SONG PATTERN
INTERNAL UPPER1 UPPER2 LOWER1 LOWER2 ACC VOL.
BANK
START/STOP
TEMPO
0
l e t e
p
Page 54
7 8 9
4 5 6
1 2 3
/NO /YESS
CH 6 CH 7 CH 8 CH 9 CH 10 CH 11 CH 12 CH 13 CH 14 CH 15 CH 16 PARAMETER RESET: 0
MAIN MANU/ DELETE
CHORD1 CHORD2 CHORD3 BASS RHYTHM TR1 TR2 TR3 TR4 TR5 TR6 CHANNEL VOLUME:
SUB MANU/
CHANNEL SELECT:
STORE
Meter (Beat)
This setting specifies the meter of the accompaniment pattern.
B t =
The display shown here appears when you specify a meter that is not
included in the table below.
B t = – – – –
IMPORTANT!
You can set the meter immediately after clearing the Pattern Se-
quencer work area only (see above). In other cases, the meter of the
accompaniment pattern currently in the work area is used, and can-
not be changed. In this case the display does not flash.
Setting
2 / 4
3 / 4
4 / 4 (initial value)
5 / 4
6 / 4
7 / 4
• Use [+] and [–] to change the setting.
Tempo
This setting specifies the initial tempo value for the accompaniment
pattern.
Tm
• Use [+] and [–] to set the initial tempo value within the range of
030 to 255.
• If the accompaniment pattern is playing when you change this set-
ting, the tempo of the pattern does not change immediately. The
value you specify becomes the current pattern's default tempo val-
ue, so you need to press both TEMPO buttons at the same time to
have the newly set tempo take effect for an ongoing pattern.
NOTE
When you turn on the Pattern Sequencer, the initial default tempo
value of the accompaniment pattern you are using as a base is ap-
plied first.
03.7.31, 5:21 PM
AMP ENVELOPE
DECAY
SUSTAIN
PITCH ENVELOPE
00 FLAT
01-17 VIBRATO
[+]/[
18-45 OTHERS –] (YES/NO)
Cursor keys
4 / 4
Setting
3 / 8
5 / 8
6 / 8
7 / 8
9 / 8
o = 1 2 0
p
733A-E-056A
Adobe PageMaker 6.5J/PPC