Using The Pattern Edit Mode - Casio WK-1600 User Manual

To record the Bass part
1.
Press CHANNEL button CH9 to select the bass part.
2.
Select a bass tone.
3.
Use the keyboard to play the bass part. Use the mea-
sure and beat values that appear on the display for
timing.
To record Chord 1, 2, and 3 parts
1.
Use CHANNEL buttons CH6, CH7, and CH8 to se-
lect a chord part.
2.
Select a chord tone. Use any tone besides the drum
sounds.
3.
Use the keyboard to play the chord part. Use the mea-
sure and beat values that appear on the display for
timing.
To delete specific notes
• Play the accompaniment pattern.
• While holding down [+] and [–], press the keyboard key that corre-
sponds to the note you want to delete at the time the note sounds
in order to delete it. To get the timing right, you probably should
press the keyboard key just before the note sounds. This will de-
lete that single note only.
To delete a part
• During record standby, select the part you want to delete and then
press [+] and [–] at the same time. In response to the message "dEL
Sure?" that appears on the display, press the YES button to delete
all of the contents of the part or NO to abort the delete procedure
without deleting anything.
E-52
WK-1800/1600(E)-48~57
PATTERN
FULL RANGE
CHORD
MAX
FINGERED
CASIO CHORD
MIN
EXTERNAL CH 1 CH 2 CH 3 CH 4 CH 5 CH 6
SONG PATTERN
INTERNAL UPPER1 UPPER2 LOWER1 LOWER2 ACC VOL. CHORD1
BANK
4 4
Page 52
CHANNEL
7 8 9
4 5 6
1 2 3
/NO /YESS
0
CH 7 CH 8 CH 9 CH 10 CH 11 CH 12 CH 13 CH 14 CH 15 CH 16 PARAMETER RESET:
MAIN MANU/ DELETE
CHANNEL VOLUME:
CHORD2 CHORD3 BASS RHYTHM TR1 TR2 TR3 TR4 TR5 TR6
SUB MANU/
CHANNEL SELECT:
STORE
ENTER

Using the Pattern Edit Mode

This section describes how to use the Pattern Edit Mode to change
various settings for a pattern you are currently creating or are about
to create.
IMPORTANT!
The procedures in this section all assume that you have read and are
familiar with the information under "Pattern Sequencer Basics" on
page E-48, and that you already know how to navigate between Pat-
tern Sequencer modes.
To select main menus and sub-menus in the
Pattern Edit Mode
1.
While in the Pattern Create Mode, press the PATTERN
button once to enter the Pattern Edit Mode.
• This causes the indicator lamp above the PATTERN button
to flash, and the Global menu to appear on the display.
Indicates the Pattern
Edit Mode.
G l o b a l
Original key Tempo display
2.
Perform the key operations described below to dis-
play a different main-menu or sub-menu.
• Use the [ ] and [ ] cursor keys to move between main-
menus.
• Press the ENTER button, [ ], or [ ] to scroll through the
sub-menu of the current main-menu. The sample display
below is the Global menu's metronome sub-menu.
Indicates the Abbreviation of
Global menu sub-menu name
M e t r = O f f
Original key
• Use [+] and [–] to change the setting of the sub-menu on the
display.
• To return to a main menu from one of its sub-menus, press
the ENTER button.
3.
To return to the Pattern Create Mode, maneuver to
the "Escape" screen and then press ENTER.
03.7.31, 5:21 PM
AMP ENVELOPE
DECAY
SUSTAIN
PITCH ENVELOPE
00 FLAT
01-17 VIBRATO
[+]/[
–] (YES/NO)
18-45 OTHERS
Cursor keys
Menu title (Global in
this case).
Indicates currently
enabled cursor keys.
Current setting of
displayed sub-menu
733A-E-054A
Adobe PageMaker 6.5J/PPC