Casio WK-1600 User Manual page 38

To name a user tone and store it in memory
1.
Select a preset tone to use as the basis for the user
tone. Next, press the SYNTH button and change the
parameter settings to create your tone.
2.
After making parameter settings to create the user tone,
press the SYNTH button.
• This causes the message "Save?" to appear on the display.
S a v e ?
• To abort the save operation without saving anything, press
NO, which causes the message "Delete?" to appear on the
display. Press NO to return to the parameter setting screen
without deleting the tone.
• Pressing YES while the "Delete?" message is on the screen
deletes the tone and exits the Synthesizer.
3.
Press YES in response to the "Save?" message to dis-
play the destination user area tone number.
N o . = 2 0 0
4.
Use the number keys to change the user area tone
number on the display until the one where you want
to store the tone is shown.
• You can select any tone number from 200 to 231.
N o . = 2 1 5
5.
Press ENTER.
• This displays the user tone input screen to appear, with the
first character of the default tone name flashing, which indi-
cates that you can input letters.
• If you do not want to assign a name, skip steps 6 and 7.
U S ER 1 6
E-36
WK-1800/1600(E)-32~38
FULL RANGE
CHORD
MAX
FINGERED
CASIO CHORD
MIN
EXTERNAL CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7
SONG PATTERN
INTERNAL UPPER1 UPPER2 LOWER1 LOWER2 ACC VOL. CHORD1 CHORD2
BANK
Page 36
TONE
Number keys
7 8 9
4 5 6
1 2 3
/NO /YESS
0
CH 8 CH 9 CH 10 CH 11 CH 12 CH 13 CH 14 CH 15 CH 16 PARAMETER RESET:
MAIN MANU/ DELETE
CHORD3 BASS RHYTHM TR1 TR2 TR3 TR4 TR5 TR6 CHANNEL VOLUME:
SUB MANU/
CHANNEL SELECT:
STORE
ENTER
6.
Use [+] and [–] and the number keys to display the
first character of the name.
• [+] and [–] input alpha characters, while the number keys
input numerals.
MS ER 1 6
7.
Press [ ] to move to the next character. Repeat step 6
to input the rest of the characters of the name.
MY S YN T H
8.
Press ENTER to save the user tone.
R e
• Press YES to save the new tone and replace any tone data
already assigned to the tone number you selected. Pressing
NO does not save the tone and returns to the screen in step
2, above.
• To cancel the save operation and exit the Synthesizer, press
SYNTH or TONE. Pressing the SYNTH button again (before
selecting another tone) returns to the Synthesizer with all of
your parameter settings still in place.
NOTE
Auto Harmonize, layer, split, Auto Accompaniment, demo tunes, Song
Sequencer, Pattern Sequencer, MIDI, and floppy disk (WK-1800 only) op-
erations are all disabled while you are using the Synthesizer.
Letters and Numerals
The table below shows the letters and numerals that you can input
for a tone name.
A B C D E
K L M N O
U V W X Y
'
( )
& —
、
0 1 2 3
9
03.7.31, 5:21 PM
AMP ENVELOPE SYNTH
DECAY
SUSTAIN
PITCH ENVELOPE
00 FLAT
01-17 VIBRATO
18-45 OTHERS [+]/[ –] (YES/NO)
Cursor keys
l a c e ?
p
F G H I J
P Q R S T
Z ! # $ %
＾
@
{ }
—
4 5 6 7 8
733A-E-038A
Adobe PageMaker 6.5J/PPC