Basic Diskette Operation - Casio WK-1600 User Manual

Access lamp Eject button
Inserting and Ejecting a Diskette
The following describes how to insert a diskette into the disk drive
and how to eject it.
To insert a diskette into the floppy disk drive
1.
With the label area of the diskette facing up, insert
the diskette shutter first into the disk drive, as shown
in the illustration.
2.
Slide the diskette into the drive as far as it will go,
until it clicks into place.
To eject a diskette from the floppy disk drive
IMPORTANT!
Before ejecting a diskette, always check to make sure that the ac-
cess lamp is not lit or flashing. A lit or flashing access lamp means
that the keyboard is performing a data read or write operation. Eject-
ing a diskette while it is being accessed can cause its data to become
corrupted.
1.
Press the Eject button.
• This causes the diskette to be partially ejected from the disk
drive.
2.
Remove the diskette from the drive by hand.
E-68
WK-1800/1600(E)-67~74
FULL RANGE
CHORD
MAX
FINGERED
CASIO CHORD
MIN
EXTERNAL CH 1 CH 2
SONG PATTERN
INTERNAL UPPER1 UPPER2
BANK
START/STOP
Page 68
CH 3 CH 4 CH 5 CH 6 CH 7 CH 8 CH 9 CH 10 CH 11 CH 12 CH 13 CH 14 CH 15 CH 16 PARAMETER RESET:
MAIN MANU/
CHANNEL VOLUME:
LOWER1 LOWER2 ACC VOL. CHORD1 CHORD2 CHORD3 BASS RHYTHM TR1 TR2 TR3 TR4 TR5 TR6
SUB MANU/
CHANNEL SELECT:
STORE
ENTER

Basic Diskette Operation

The following is the basic procedure when using a diskette.
1.
Insert a diskette into the keyboards disk drive.
2.
Press the DISK button.
• This causes the indicator lamp above the DISK button to light,
which indicates the SMF Play Mode. See "Playing Back an
SMF" on page E-69 for details on using this mode.
3.
Press the DISK button again to display the first disk
operation screen.
• The indicator lamp above the DISK button flashes at this time.
4.
Scroll through the disk operation screens.
• Use the [ ] and [ ] cursor keys to scroll through the four
available screens.
O
[ ]
D i s k L o a d
[ ]
D i s k S a v e
[ ]
U t i l i t
• Option ... Use this screen to set SMF playback options. See
"Playing Back an SMF" on page E-69.
• DiskLoad ... Use this screen to load a file created with the
WK-1800. See "To load keyboard data from a diskette" on
page E-71.
• DiskSave ... Use this screen to save data created with the
WK-1800. See "To save keyboard data to diskette" on page
E-70.
• Utility ... Use this screen to access utilities that let you con-
vert rhythm data, delete data from a diskette, and format a
diskette. See "Using the Utilities" on page E-71.
5.
Perform the operation for the displayed disk opera-
tion screen.
• Use the [ ] and [ ] cursor keys to make settings.
• See the sections that follow this procedure for full details on
performing disk operations.
6.
After you are finished, press the DISK button.
• This causes the indicator lamp above the DISK button to go
out.
NOTE
You will be able to start the above procedure even when there is no dis-
kette in the disk drive.
03.7.31, 5:22 PM
[+]/[ –]
AMP ENVELOPE
DECAY
7 8 9
SUSTAIN
4 5 6
PITCH ENVELOPE
00 FLAT
1 2 3
01-17 VIBRATO
/NO /YESS
0 18-45 OTHERS
DISK
DELETE
Cursor keys
t i o n
p
[ ]
[ ]
[ ]
y
733A-E-070A
Adobe PageMaker 6.5J/PPC