Canon BJ-10sx User Manual page 40

BJ-10e Mode Font Styles
In BJ-10e mode, the following font styles are available:
Emphasized -- makes characters bold
Double high -- doubles the height of characters
Double wide -- doubles the width of characters
Slashed zero -- adds a slash to a numeric zero
Selecting a font style
To select a font style in BJ-10e mode, follow these steps:
1. Make sure the printer is on-line.
2. Simultaneously press the ON LINE and PITCH buttons.
The printer sounds a long varied tone and the ON LINE
indicator light blinks.
3. Press the PITCH button as follows.
Press Selects
once Emphasized
twice Double high
three times Double wide
four times Slashed zero
five times Unused
six times Return to default settings
seven times No change to current settings
The printer sounds a low tone each time you press the PITCH
button, and it beeps twice after you press PITCH seven times.
NOTE: If you cannot remember the font style you have selected,
press the PITCH button until the printer beeps twice. Now you
can start over; press PITCH to select the desired font style.