Basic Control Codes - Canon BJ-10sx User Manual

Basic Control Codes

NOTE: Because of hardware differences, the reverse feed code
(ESC ]) is not supported by your printer. Also, the styles of
block graphics characters at 12 cpi are different from those used
by the IBM Proprinter X24E.
Function
End command
Sound beeper
Backspace one character
Horizontal tab control;
move to next tab
Perform line feed
Vertical tab control;
move to next tab
Perform form feed
Perform carriage return
Set double-wide mode by line
Set condensed mode (17 cpi);
cancelled by DC2
Set printer on-line
Set 10 cpi mode
Set printer off-line
Cancel double-wide mode
Cancel data
Insert space
ASCII Decimal Hexadecimal
NUL 0 00
BEL 7 07
BS 8 08
HT 9 09
LF 10 0A
VT 11 0B
FF 12 0C
CR 13 0D
SO 14 0E
SI 15 0F
DC1 17 11
DC2 18 12
DC3 19 13
DC4 20 14
CAN 24 18
SP 32 20