Appendix B. TapeAlert flags
TapeAlert is a patented technology and standard of the American National
Standards Institute (ANSI) that defines conditions and problems that are
experienced by tape drives. The technology enables a server to read TapeAlert
flags from a tape drive through the host interface. The server reads the flags from
Log Sense Page 0x2E. See the IBM LTO Ultrium Tape Drive SCSI Reference document
for the list of TapeAlert flags that are supported by this tape drive. To download
the IBM LTO Ultrium Tape Drive SCSI Reference document (PDF), go to
http://www-01.ibm.com/support/docview.wss?uid=ssg1S7001045&aid=1.
© Copyright IBM Corp. 2011
57