Table of Contents
Advertisement
Updating firmware
Attention: When updating firmware, do not turn off power to the drive until the
update is complete, or the firmware update might not take effect.
It is your responsibility to make sure that the drive has the latest firmware.
Periodically check for updated levels of drive firmware by visiting the IBM
website.
To download the latest firmware, go to http://www-947.ibm.com/systems/
support/supportsite.wss/docdisplay?lndocid=TAPE-FILES&brandind=5000019, or
complete the following steps.
Note: Changes are made periodically to the IBM website. The actual procedure
might vary slightly from what is described in this document.
1. Go to http://www-947.ibm.com/support/entry/portal/.
2. In the Search within all of support & downloads text field at the bottom of
3. In the list of search results, click the link Tape Files (index) - Software for tape
4.
16
Half-High LTO Gen 5 SAS Tape Drive Installation and User's Guide
the screen, type tape files and press Enter.
drives and libraries.
Advertisement
Table of Contents
