Replacing the external video board
Tools you need to complete this task:
Screws removed during this task:
To replace the external video board:
1
2
3
4
5
6
7
8
www.gateway.com
Flat-blade driver
Phillips #0 screwdriver
1 black (DVD drive)
1-3 black (keyboard)
17 black (palm rest - bottom)
Complete the steps in
"Preparing the notebook" on page
Remove the DVD drive by following the instructions in
page
11.
Remove the cooling assembly by following the instructions in
assembly" on page
14.
If the notebook has IEEE 802.11 wireless networking built in, unplug the antenna cables
from the IEEE 802.11 wireless card by following the instructions in
802.11 wireless card" on page
Remove the hard drive kit by following the instructions in
page
26.
Remove the keyboard cover by following the instructions in
on page
29.
Remove the keyboard by following the instructions in
Remove the LCD panel by following the instructions in
on page
38.
- OR -
5.0 mm hex nutdriver
2 black (hard drive kit)
4 black (LCD panel hinges)
2 chrome hexnut (external video board)
"Replacing the DVD drive" on
22.
"Replacing the keyboard" on page
"Replacing the LCD panel assembly"
Scribe or non-marring tool
2 black (keyboard cover)
4 black (palm rest - top)
2 black (external video board)
6.
"Replacing the cooling
"Replacing the IEEE
"Replacing the hard drive" on
"Replacing the keyboard cover"
31.
67