Gateway MT6451 Service Manual page 70

15
16
17
18
19
20
21
22
23
24
66
Replacing Notebook Components
Remove the four screws that secure the system board to the notebook.
Screw Screw
Screw
Turn the system board over and disconnect the external video board cable from the old
system board and connect it to the new system board.
Install the new system board into the notebook, then replace the screws you removed in
Step 15.
Replace the palm rest by following the instructions in
Replace the LCD panel assembly onto the notebook by following the instructions in
"Replacing the LCD panel assembly" on page
Replace the keyboard by following the instructions in
Replace the keyboard cover by following the instructions in
on page 29.
Replace the hard drive kit by following the instructions in
page 26.
Replace the DVD drive by following the instructions in
page 11.
Plug the antenna cables into the IEEE 802.11 wireless card, then replace the wireless bay
cover.
Screw
38.
"Replacing the palm rest" on page
"Replacing the keyboard" on page
"Replacing the keyboard cover"
"Replacing the hard drive" on
"Replacing the DVD drive" on
56.
31.