Gateway MT6451 Service Manual page 37

7
Loosen the wireless bay cover screw (this screw cannot be removed), then remove the
wireless bay cover.
8
Remove the two optional keyboard screws.
Depending on the keyboard features, one or both of these screws may be
absent.
Screw
9
Turn the notebook over so the top is facing up, then open the LCD panel to the fully opened
position.
10
With the back edge of the keyboard raised, carefully push it toward the LCD panel to release
the keyboard retaining tabs. Be careful not to damage the LCD panel.
www.gateway.com
Screw
Screw
33