Connecting To The Port Replicator; Www.gateway.com; Attaching To The Port Replicator - Gateway M460 User Manual

Chapter 7: Using the Optional Port Replicator
Component
Monitor port
Parallel port
Serial port
Microphone jack
Power connector

Connecting to the port replicator

You can attach your notebook to the port replicator while your notebook
is off, on, or in Standby mode.

Attaching to the port replicator

To attach your notebook to the port replicator:
1
Connect external devices to the ports on the port replicator.
2
Rest the front edge of the notebook on your desktop, then align the
mark on the left hinge cover with the corresponding mark on the
port replicator.
84
Icon Description
Plug an analog VGA monitor or projector into this port.
Plug a parallel device (such as a printer) into this port.
Plug a serial device (such as a digital camera) into this
port.
Plug a microphone into this jack. The built-in microphone
is turned off when a microphone is plugged into this jack.
For the location of your built-in microphone, see
"Keyboard area" on page
Plug the AC adapter cable into this connector.

www.gateway.com

15.