Replacing The System Board - Gateway FX530 Reference Manual

Replacing the system board

Tips & Tricks
You need a Phillips
screwdriver to replace
the system board.
Reconnect the expansion card cables (if
10
any) using your notes from Step 6, or, if
adding a new card, follow the
manufacturers instructions.
Return your computer to its upright
11
position.
Replace the side panel by following the
12
instructions in "Replacing the side panel"
on page 55.
To replace the system board:
Remove the side panel by following the
1
instructions in "Removing the side panel"
on page 51.
For more stability, place your computer on
2
its side. To avoid scratching the case, place
it on a towel or other non-abrasive surface.
Disconnect any cables that are attached to
3
any expansion cards, noting their locations
and orientation. (You will reconnect the
cables after you install the cards on the
new board.)
Replacing the system board
79