Gateway FX530 Reference Manual page 50

To change the clock speed of your processor:
Turn off your computer and disconnect the
1
power cord.
Place your computer on its side with the
2
side accesss panel facing up.
Follow the anti-static precautions in
3
"Preventing static electricity discharge" on
page 50.
Open the side panel and locate the jumper
4
labeled J3C2 BIOS Config on the system
board.
J3C2 BIOS
Config jumper
J2B3 jumper
(do not adjust)
Remove the jumper from its normal
5
position (bridging pins 1-2), then place it in
the maintenance boot position (bridging
pins 2-3).
Reconnect the power cord.
6
Turn on your. The BIOS Setup utility opens.
7
Press the arrow keys to select the
8
Performance tab. Press the arrow keys to
highlight Set Processor Multiplier, then
press Enter.
Overclocking the processor
45