Gateway FX530 Reference Manual page 47

CHAPTER 4: Advanced Hardware Setup
42
Change the following settings:
4
Name—Type a volume name (up to
■
16 characters) or use the default
name, then press E
RAID Level—Press ↑ or ↓ to select
■
the RAID level, then press E
Select Disks—Press ↑ or ↓ to
■
highlight drives, press the spacebar
to select (mark with a green
triangle) each drive to use in the
array, then press E
select a minimum of two drives.
Strip Size—If you have selected
■
RAID 0, RAID 5, or RAID 10, select
the strip value for the array, then
press E
RAID 0 and RAID 10, 64 KB for
RAID 5. We recommend accepting
the default strip value.
Capacity—Type the volume
■
capacity, or use the default
capacity, then press E
recommend using the default value
(the maximum capacity with the
drives you selected).
Highlight Create Volume, then press
5
E . A warning appears.
NTER
Type Y. The RAID volume is created and the
6
MAIN MENU opens.
Highlight 4. Exit, then press Enter. You exit
7
the Matrix Storage Manager, and your
computer restarts.
www.gateway.com
NTER
NTER
. Defaults: 218 KB for
NTER
NTER
.
.
NTER
. You must
. We