Gateway 710XL User Manual page 221

6
Locate the old battery on the system board and note its orientation. You
will need to install the new battery the same way.
7
Push the battery release tab. The battery pops out of the socket.
8
Make sure that the positive (+) side of the new battery is facing up, then
press the battery into the socket until it snaps into place.
9
Replace the side panel by following the instructions in
panel" on page
10
Reconnect all external cables and the power cord.
11
Turn on your computer.
12
Open the BIOS Setup utility.
13
In the BIOS Setup utility, restore any settings that you wrote down in
Step 2.
14
Save all your settings and exit the BIOS Setup utility.
Battery
196.
www.gateway.com
Replacing the system battery
"Replacing the side
213