Pjlink Notice - Sanyo PDG-DWL100 Owner's Manual

Appendices
4. Type the commands, refer to right
Enter with ASCII
64-byte capital char-
acters and one-byte To disconnect the communication,
characters.
press "Ctrl" key and "]" key at the
same time, type "close" and then press
"Enter" key on the Keyboard.
The table right shows the typical com-
mand lists for controlling this projector
During the standby
and please consult your local dealer for
mode status, the projec-
further information of another com-
tor responds to "Power
mands.
On" through RS232/
PJLink/Telnet com-
mands.

PJLink Notice

PJLink is a registered trademark of JBMIA and pending trademark in
some countries.
60
English
All manuals and user guides at all-guides.com
table, to control the projector and
then press "Enter" key for termina-
tion. For example, type "C00" which
is a command to turn on the projec-
tor, and press "Enter" key. Confirm
the projector is turning on.
> close [return]
This projector is compliant with PJLink Standard Class 1 of
JBMIA (Japan Business Machine and Information System
Industries Association). This projector supports all com-
mands defined by PJLink Class 1 and is verified conformance
with PJLink Standard Class 1.
Projector
Input
Computer 1
YPbPr 1
SCART
Computer 2
YPbPr 2
Video
S-Video
HDMI
Command list table
Command Function
C00 POWER ON
POWER OFF
C01
(Immediate POWER OFF)
C09 Volume +
C0A Volume -
C0B SOUND MUTE ON
C0C SOUND MUTE OFF
C0F Aspect 4:3
C10 Aspect 16:10
C1C MENU ON
C1D MENU OFF
PJLink
Input Parameter
RGB 1 11
RGB 2 12
RGB 3 13
RGB 4 14
RGB 5 15
VIDEO 1 21
VIDEO 2 22
DIGITAL 1 31