Pjlink Notice - Sanyo PDG-DWL100 Owner's Manual

Appendices
Enter with ASCII
64-byte capital char-
acters and one-byte
characters.
During the standby
mode status, the projec-
tor responds to "Power
On" through RS232/
PJLink/Telnet com-
mands.
60
English
4. Type the commands, refer to right
table, to control the projector and
then press "Enter" key for termina-
tion. For example, type "C00" which
is a command to turn on the projec-
tor, and press "Enter" key. Confirm
the projector is turning on.
To disconnect the communication,
press "Ctrl" key and "]" key at the
same time, type "close" and then press
"Enter" key on the Keyboard.
> close [return]
The table right shows the typical com-
mand lists for controlling this projector
and please consult your local dealer for
further information of another com-
mands.

PJLink Notice

This projector is compliant with PJLink Standard Class 1 of
JBMIA (Japan Business Machine and Information System
Industries Association). This projector supports all com-
mands defined by PJLink Class 1 and is verified conformance
with PJLink Standard Class 1.
Projector
Input
Computer 1
YPbPr 1
SCART
Computer 2
YPbPr 2
Video
S-Video
HDMI
PJLink is a registered trademark of JBMIA and pending trademark in
some countries.
Command list table
Command
C00
C01
(Immediate POWER OFF)
C09
C0A
C0B
C0C
C0F
C10
C1C
C1D
PJLink
Input Parameter
RGB 1 11
RGB 2 12
RGB 3 13
RGB 4 14
RGB 5 15
VIDEO 1 21
VIDEO 2 22
DIGITAL 1 31
Function
POWER ON
POWER OFF
Volume +
Volume -
SOUND MUTE ON
SOUND MUTE OFF
Aspect 4:3
Aspect 16:10
MENU ON
MENU OFF