Use Of Telnet - Sanyo PDG-DWL100 Owner's Manual

Use of Telnet

You can control the projector by using the telnet application
installed on your computer. Normally, the telnet application
The telnet 10000 port
is used to control the is available on your computer.
projector.
Further instructions
about the telnet ap-
Control
plication, please see the
(For example, in case of using the telnet application of Windows XP
on-line guide on your
computer.
Professional.)
1. Select Run... submenu from Start menu on the computer. Type
"telnet" onto the Open text area on the displayed window and press
OK button.
2. The telnet application will start and the following window will be
displayed. Type as below to connect the projector.
> open 192.168.1.201 10000 [return]
* Use the IP address assigned to the projector.
3. When communication is established correctly, the word "PASS-
WORD:" appears on the window. Type the login telnet password
for the projector and then press "Enter" key on the keyboard. If you
do not set up the telnet password, just press "Enter" key. When the
word "Hello" is replied, login has been succeeded.
* The password "1234" is used for the example.
All manuals and user guides at all-guides.com
Appendices
59
English
English