Powering On/Off The Projector; Powering On The Projector - Sanyo PDG-DWL100 Owner's Manual

Powering On/Off the Projector

Powering On the Projector

1. Ensure that the power cable and signal cable are securely
connected. The POWER LED will turn orange.
2. Remove the lens cap. 
3. Turn on the lamp by pressing "ON/STAND-BY" on the
control panel.  The POWER LED will now flash green.
Please adjust external
speaker volume to the
The startup screen will display in approximately 5 seconds.
minimum before turn-
When disappear startup screen, the POWER LED will turn
ing on the projector.
green.
After the user presses
4. Turn on your source (computer, notebook, video player,
the power button and
etc.) The projector will detect your source automatically.
green LED glitters, it
takes a little time for
the projector to project
 I f you connect multiple sources at the same time, use the
the image.
"INPUT" on the remote control or use "COMPUTER 1",
"COMPUTER 2", "S-VIDEO", "VIDEO", "HDMI" on the
remote control to switch inputs.
Turn on the projector
first and then the signal
sources.
1
All manuals and user guides at all-guides.com
Installation
Lens Cap
2
Power
English
English
15