8 - WATER CONNECTIONS
Légende
Composants du module hydraulique et de l'unité
1
Victaulic screen filter
2
Pressure sensor
Note: Gives pump suction pressure information (see installation manual)
3
Relief valve
4
Water drain valve
Note: A second valve is located on the heat exchanger leaving piping
5
Shut-off valve
6
Available pressure pump
7
Temperature probe, BPHE inlet Note: Gives heat exchanger entering temperature
information (see installation manual)
8
Pressure gauge
Note: Allows measuring of the pump suction pressure, the pump leaving pressure
Hydraulic module - 61AF
61AF 022-035
61AF 045-105
and the heat exchanger leaving pressure
9
Temperature probe, BPHE outlet
Note: Gives heat exchanger leaving temperature information (see installation
manual)
10 Automatic air vent
11
Flow switch