3 - DIMENSIONS, DÉGAGEMENTS
3.6 - 61AF 075-105 option 11, units with and without hydraulic module
Legend :
All dimensions are given in mm mm.
B
Required clearances for air flow
C
Recommended clearances for maintenance
Control box
Water inlet
Water outlet
Air outlet, do not obstruct
Air outlet, do not obstruct
3.7 - Multiple-unit installation
NOTE: If the walls are higher than 2 m, contact the factory.
2100
1000
1
Solid wall
1
2
2
1000
NOTES: :
A Non-certified drawings.
Refer to the certified dimensional drawings supplied with
the unit or available on request, when designing an
installation. For the location of fixing points, weight
distribution and coordinates of the centre of gravity refer
to the certified dimensional drawings.
B In multiple-unit installations (maximum four units), the
side clearance between the units should be increased
from 1000 to 2000 mm.
C The height of the solid surface must not exceed 2 m.
Solid wall
2273