Garmin GPS 90 Owner's Manual & Reference page 33

The field highlight will automatically advance to the
bearing field. To enter a bearing and range from the
reference position:
E
1. Press to begin entry of the compass bearing.
2. Use the arrow keypad to enter the bearing of the new way-
point from the reference position.
E
3. Press to confirm the bearing. The field highlight will
automatically move to the distance field.
E
4. Press to begin entry of the distance.
5. Use the arrow keypad to enter the distance of the new way-
point from the reference position.
E
6. Press to confirm the distance. The GPS 90 will calcu-
late the coordinates of the waypoint and store it in memory.
Once a new user waypoint is saved, the GPS 90 will
assign a default user comment (the date and time of cre-
ation) to the new waypoint. You can change the default
comment to a custom comment at any time, right from
the user waypoint page.
To enter a user comment:
1. Use the arrow keypad to highlight the comment field.
E
2. Press the
3. To clear the default comment, press the
4. Use the arrow keypad to enter the comment. Press
The delete and rename prompts, located at the bottom
of the user waypoint page, allow you to quickly remove
a waypoint from memory or change the name of an
existing waypoint.
To delete a user waypoint:
L
1. Use the key to move the field highlight from the 'DONE'
prompt to the 'DELETE' prompt and press
L
2. Use the key to highlight the 'Yes' prompt and press
key.
L
key.
E
.
E
.
E
.
Waypoints
& Database
User
Waypoints
Entering a range and
bearing from a refer-
ence waypoint.
Deleting a User
Waypoint
25