To Select A Frequency List For A Departure, En-Route Or Arrival Airport - Garmin GPS 500 Pilot's Manual & Reference

NAVCOM Page
Departure, En-route
or Arrival Airport
Frequency Type
The third NAV page is the NAVCOM (navigation communications) page. The NAVCOM page
provides a list of the airport communication and navigation frequencies at your departure, en-route and
arrival airports. The NAVCOM page makes selection of the frequencies you'll need along your flight
plan quick and convenient. If you do not have an active flight plan with a departure airport, the
NAVCOM page displays the frequencies for the airport nearest your departure position.
F
NOTE: The NAVCOM page is the fourth page in the NAV group when the GPS 500 installation
includes connection to traffic and/or weather information sources. See 400/500 Series Display
Interfaces Pilot's Guide Addendum.

To select a frequency list for a departure, en-route or arrival airport:

1. Press the small right knob to activate the cursor.
2. Rotate the large right knob to place the cursor on the airport identifier field (top line on the NAVCOM page).
3. Rotate the small right knob to select the desired airport and press ENT.
Assigned Frequency
and Usage Information
(when applicable)
Third Page in NAV Group*
If your installation includes connection to traffic
and/or weather systems, the Traffic/Weather page
appears as one of five available NAV pages.
The NAVCOM page lists available frequencies for
your departure, en-route and arrival airports.
1 - NAV Pages
NAVCOM Page
33