Installation And Initial Setup; Preparation Before Installation - A.O. Smith aosbath MAX4 Instruction Manual

3. OPERATION GUIDE
Particle Carbon
filter filter

4. INSTALLATION AND INITIAL SETUP

The system must be installed by an authorized personnel from AOS Bath as the system can only be
activated with unique activation codes from the manufacturer

PREPARATION BEFORE INSTALLATION

• Determine installation location, dependent on the actual on-site environment
• Determine various tools required for installation (wrench, electric drill, hole opener, screwdriver, pipe cutter,
needle-nose plier).
• Cut off water and electric supply before installation.
• Inventory check of all required installation accessories
Reverse
Osmosis filter
2. Faucet Display
When the system is powered on, the faucet icon will light up.
The indicator light colour on the faucet syncs to the indicator light
Indicator light
on the system. If the display colour is orange or red, call the
service hotline to request for product maintenance
INSTRUCTIONS
1. System Display
The indicator lights correspond to the remaining
service life of each filter.
White : Product and filter life is normal
Orange : The filter life is down to 5%, order
replacement filters.
Red : The filter life is down to 0%, replace filter
immediately.