Printing The System Information Page; Creating A Shortcut To The System Control Center; Installation And Activation Complete - Hughes HughesNet HN9000 Installation Manual

Chapter 7

Printing the System Information page

Help the customer print a copy of the System Control Center's System Information page, which contains important
information about the status of the satellite modem. Explain to the user that they will need the information on this page
if they ever contact Hughes Customer Care at a time when they cannot access the System Information page.
1. Show the customer how to open the System Control Center home page.
If you need instructions, see Accessing the System Control Center on page 56.
2. Tell the customer to click the System Info link to open the System Information Page.
3. Tell the customer to click the Print this page link near the center of the screen.
The page should print. Tell the customer to keep it in a safe place.
Note: If the you cannot print the page, you can capture the screen image by pressing Alt+PrintScreen. Paste
the captured image into a word processing document or image editor program and then save the image in a file.

Creating a shortcut to the System Control Center

Create a desktop shortcut to the System Control Center home page on the customer's computer. If you need instructions
for this, see Creating a shortcut to the System Control Center on page 56.

Installation and activation complete

At this point installation and activation of the satellite modem are complete. The remaining information in this manual
is provided for reference or troubleshooting purposes. You may or may not need it.
Once the satellite modem is installed and activated, you or the customer may connect a router in the path using the IP
information shown in Figure 27: Welcome screen on page 46.
52
HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A