Figure 14: Installation Screen - Hughes HughesNet HN9000 Installation Manual

Chapter 3
Note: On some screens you may see the word terminal. This word refers to the satellite modem.
4. For each of the following parameters, select the value that is listed on the Installation Reference Sheet:
• Terminal site name – Note that this field is case-sensitive.
• A code – Satellite orbital location. The value 0949505, which corresponds to the orbital location 94.950° W.
• B code – Antenna size. The B code and C code values are used to ensure that the satellite modem transmits at
the correct maximum power.
•
For the HN9000 modem, select 0.74 m or 0.98 m antenna size only.
• C code – ODU power
22
HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A

Figure 14: Installation screen

B code
0749
0988
1208
1804
C code
000103
000200
Antenna size
0.74 m
0.98 m
1.2 m
1.8 m
Nominal ODU power
1 W
2 W