Using The Eq Library; Adjusting The Dynamic Processors - Yamaha AW2400 Manual

Hide thumbs Also See for AW2400:

Table of Contents

For example, if you listen to a track and feel that it is not clear enough

instead of adding EQ in the high end you may be better off taking out some

frequencies in the midrange. This will have the desired effect but will add less

noise.

Using the EQ Library

Press the [TRACK SEL] key of the track that you want to apply EQ to.

Press the [PAN/EQ SEL] key in the SELECTED

CHANNEL section of the AW2400 until the EQ

Library screen is displayed.

Use the [DATA/JOG] wheel to select the desired EQ preset.

Cursor to the RECALL button in the LCD and press the [ENTER] key.

This is for basic EQ adjustment. For complete control, use the cursor keys to

select the various parameters within the EQ EDIT screen and then use the DATA/JOG

wheel to adjust them.

Using the Dynamics Processors

After adjusting the EQ for all of the tracks it may be desirable to use the

internal dynamic processors of the AW2400. The purpose of a dynamics

processor is to adjust the dynamic range of the track. For example, if a vocal

track changes volume drastically throughout the song it would best to use a

dynamics processor to make the volume level more consistent throughout the

song. The type of dynamics processor that would be used to do this is a

compressor.

Table of Contents