Yamaha AW2400 Manual page 16

2. While playing the instrument, turn the GAIN knob up
to adjust the input level. The meter on the right side
of the Input Setting screen should be between the –6
to 0dB mark when the instrument is at its maximum
level.
3. In the Quick Navigate section press the [RECORD] key
until the DIRECT page of the RECORD screen is
displayed.
The [INPUT SEL] keys and the [TRACK SEL] keys will now be red and blinking.
4. Press the [INPUT SEL] key for the input channel that you are going to
record from.
The [INPUT SEL] that was pushed will now be solid red, and the remaining
[INPUT SEL] keys will no longer be blinking.
5. Press the [TRACK SEL] key of the track that you want to record on.
13