Yamaha AW2400 Manual page 12

3. In the Quick Navigate section press the
[RECORD] key until the DIRECT page of the
RECORD screen is displayed.
The [INPUT SEL] keys and the [TRACK SEL] keys will now be red and blinking.
2. Press the [INPUT SEL] key for the input channel that you are going to
record from.
The [INPUT SEL] that was pushed will now be solid red, and the remaining [INPUT SEL]
keys will no longer be blinking.
3. Press the [TRACK SEL] key of the track that you want to record on.
The selected input channel will now be connected to the selected track. Both the
selected [INPUT SEL] key and the selected [TRACK SEL] key will be blinking red and
there will be a line connecting the two on the screen.
9