Assembling The Shrub Shears; Removing And Fitting The Battery - Stihl HSA 26 Instruction Manual

7 Assembling the Shrub Shears

► Insert battery.
► Press the button (1).
The LEDs emit green light for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.4 LEDs on Shrub Shears
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
18.1.
There is a malfunction in the shrub shears or
battery.
6.5 LED on Charger
The LED indicates the operating status of the
charger or faults. The LED can glow or flash
green or red.
If the LED glows or flashes green, the battery is
being charged.
► If the LED glows or flashes red: Troubleshoot‐
ing, 18.2.
There is a malfunction in charger or battery.
7 Assembling the Shrub
Shears
7.1 Fitting and Removing the Cut‐
ting Blades
7.1.1 Fitting the Shrub Shear Blade or
Grass Shear Blade
The shrub shear blade and grass shear blade
are fitted on the shrub shears in the same way.
► Switch off the shrub shears and remove the
battery.
► Fit the blade scabbard so that it completely
covers the cutting blades.
1
1
2
2
0458-601-9821-B
3
4
► Engage the lugs (1) of the shrub shear blade
(3) or grass shear blade (3) on the guides (2).
► Swing the shrub shear blade (3) or grass
shear blade (3) down and press it firmly into
place.
The shrub shear blade (3) or grass shear
blade (3) engages with an audible click.
► Remove the blade scabbard (4).
7.1.2 Removing the Shrub Shear Blade or
Grass Shear Blade
The shrub shear blade and grass shear blade
are removed in the same way.
► Switch off the shrub shears and remove the
battery.
► Fit the blade scabbard so that it completely
covers the cutting blades.
2
1
1
► Press in both locking levers (1).
The shrub shear blade (2) or grass shear
blade (2) is unlocked.
► Remove the shrub shear blade (2) or grass
shear blade (2).
A foam seal (3) protects the gearbox from con‐
tamination during operation. The seal (3) is per‐
manently connected to the shrub shears and
cannot be removed.
8 Removing and Fitting the
Battery
8.1 Fitting the Battery
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages in position with a
click.
English
3
2
1
35