Installing The Ceiling Bracket - Hunter Anorak Installation Manual

You have two options for installation. Pick which one works best for your location. Remove any existing
bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan's box.
Hunter Pro Tip:
The machine screws are the ones
that came with your outlet box.
Option 1:
Machine Screws
Use machine screws (pro-
vided with outlet box) when
securing to existing ceiling
fan-rated outlet box. Make
sure it is securely installed
and is acceptable for fan
support of 31.8 kg (70 lbs)
or less.
For angled ceilings,
point opening
toward peak.
Ceiling Bracket Downrod

Installing the Ceiling Bracket

Hanging Fan Wiring
Option 2:
Wood Screws
Use wood screws (included)
when securing to support
structure with approved
electrical outlet box. Drill
9/64" pilot holes in support
structure to aid in securing
ceiling bracket with
hardware found in the
hardware bag.
Use the wood screw to poke holes
through the rubber gasket in
order to install the ceiling bracket
assembly to your support structure
or ceiling fan-rated outlet box.
Canopy Blades
bag
Light Glass
1886
x2
Washer
x2
Wood Screw
4
Control