Changing User Level Password; Changing Http Web Port; Web Configuration Pages Definitions; Figure 6: User Level Password - Grandstream Networks HT814 Administration Manual

https://arttel.ru/

Changing User Level Password

1. Access your HT814 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings and navigate to Basic Settings.
4. Enter the new end-user password.
5. Confirm the new end-user password.
6. Press Apply at the bottom of the page to save your new settings.

Changing HTTP Web Port

1. Access your HT814 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Navigate to Basic Settings > Web Port.
5. Change the current port to your desired/new HTTP port. Ports accepted are in range [1-65535].
6. Press Apply at the bottom of the page to save your new settings

Web Configuration Pages Definitions

This section describes the options in the HT814 Web UI. As mentioned, you can log in as an administrator
or an end user.

Status: Displays the system info, network status, account status, and line options.

Basic Settings: Configures the end user level password, IP address modes, web access, time zone
settings and language.

Advanced Settings: Configures networks, upgrading and provisioning, TR-069, security settings,
date and time, syslog, audio settings, call settings and call progress tones.

Profile (1,2): Configures the SIP Server, SIP Registration, NAT settings, call features, ring tones.

FXS Port: Configures SIP accounts settings, Off hook Auto-dial.
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-814

Figure 6: User Level Password

Figure 7: Web HTTP Port

HT814 Administration Guide
P a g e | 20