Changing User Level Password; Changing Http Web Port; Figure 9: Admin Level Password; Figure 10: User Level Password - Grandstream Networks HT818 User Manual

2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Advanced Settings  New Admin Password and enter the new admin password.
5. Confirm the new admin password.
6. Press Apply at the bottom of the page to save your new settings.

Changing User Level Password

1. Access your HT81X web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings  New End User Password and enter the new end-user password.
5. Confirm the new end-user password.
6. Press Apply at the bottom of the page to save your new settings.

Changing HTTP Web Port

1. Access your HT81X web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings  HTTP Web Port.
5. Make sure that the Web Access Mode is set to HTTP.
6. Change the current port to your desired/new HTTP port. Ports accepted are in range [1-65535].
7. Press Apply at the bottom of the page to save your new settings

Figure 9: Admin Level Password

Figure 10: User Level Password

HT81x User Guide
P a g e | 23